Outdoor Coatings
YOUR OPTIONS:
Waterproof Deck Coating
4-7 day Install.
Using high-quality industrial grade wood coating materials we make beautiful and long lasting wood deck coatings. Including a waterproof polycoat membrane coating basecoat, with decorative vinyl flakes on top with a durable, uv stable top coat of clear polyaspartic coating. Must be on new CDX tongue and groove style plywood with no gaps or soft spots. Does not include the drip edge or metal coping.
Stain, scratch and chemical resistant.
Full Polyaspartic Flake Floor
2-3 day install.
Concrete grinding prep, free hairline crack repair, 100% Broadcast of decorative flakes, commercial grade 100% solids Epoxy base-coat and commercial grade polyaspartic top-coat.
Stain, chemical, and scratch resistant.
Non-Slip Sand Floor
2-3 day install.
Concrete grinding prep, free hairline crack repair, commercial grade epoxy base-coat with a full broadcast of medium grit sand for traction and a commercial grade polyaspartic top-coat.
Nonslip, Stain, chemical, scratch, and UV resistant.
Glass Finish Flake Floor
3-4 day install.
Concrete grinding prep, free hairline crack repair, 100% Broadcast of decorative flakes, commercial grade polyaspartic base-coat and commercial grade polyaspartic top-coat, with an extra polyaspartic top coat to make a smoother and easier to clean surface over the flakes.
Stain, chemical, scratch, and UV resistant, easiest to clean.
Quartz Floor
This is a double broadcasted quartz floor including 3 layers of commercial grade polyaspartic coating and 2 layers of non-slip, scratch resistant, colored quartz aggregate, pick from many different color blends to customize your floor! Includes all prep needed for a long lasting application. A fantastic application for restaurants, airports, automotive shops, etc! Easy to clean and long lasting! 3-5 days to install with a 24hr cure time for foot traffic and 3-5 days for vehicle traffic.
Stain, chemical, scratch, and UV resistant.
Single Color Coating
Your choice between polyaspartic or polyurethane we apply two thick even coats of commercial grade product, including all state-of the art industry leading concrete prep methods.
Stain and UV resistant with medium scratch resistance.
-
Sealed Controll Joints
Seals the control joints (lines) in the concrete slab with a semi flexible urethane caulk to keep out water, snow, dirt, oil, and debris. This helps to avoid future settling in the concrete and makes the floor more clean and finished looking. This does not promise a seamless floor, just promises sealed joints. The flexible caulking goes underneath the coating thus this add-on may shorten the life of the floor because when the concrete squares move it can crack the epoxy on top of the flexible caulk, although we rarely see issues and customers who get this are glad they did.
-
Vertical Surfaces Coated (Footings)
Customize your floor by matching the vertical concrete surfaces (footings/stem walls) in this area with the floor! Often this vertical concrete is bumpy and ugly, so we grind down the bumps, and coat to match the floor including flakes and topcoat! This is extra because it takes specialized equipment and materials. We recommend adding "perimeter caulk" if you choose to get the vertical surfaces coated!
-
Perimeter Caulk
This is a rounded section of caulk that goes against concrete walls where the floor meets the wall, filling the gap and waterproofing the gap where the floor meets the foundation. For areas where vertical surfaces will be coated. Without this add-on the gap between the floor and the concrete wall is an eye sore when the epoxy is done. Many customers that don't get it often say they wish they did.
-
Non-Slip Additive
This is a broadcasted very fine sand in the topcoat of the coating to create a texture that helps with grip. Made with aluminum oxide this additive is made to ensure peak traction in wet conditions. Be advised that all concrete coatings can be slippery when wet although, this helps.
-
Grout Lines
Customize any coating by adding indented grout lines of any available color to create the effect of tile. We use the method of placing tape by hand then coating over it and pulling it off when it's dry enough to create the lines. No hand placed grout lines are perfect although we pride ourselves on having extreme attention to detail with these lines. Create a custom design pattern or suggest one of your own!
-
2 Tone Flake
Add a second color of flakes to really make your floor pop! Instead of simply using one color of flakes for the entire floor, add a second color to create a two tone effect!